Kola

Kola

Aktivní filtry

MCS radial 48 fat spoke front wheel 3.50 x 23 SF black
Rychlý náhled

MCS radial 48 fat spoke...

MCS radial 48 fat spoke front wheel 3.50 x 23 SF black SF (Single Flange). Ready to run black powder coated wheel that is built with 48 8mm diameter steel spokes, a steel rim and an aluminum hub. Only spoke nipples are chrome. Wheel is pre-sealed and suitable for tubeless tires. 1' ID roller bearings are pre-installed and the brake rotor/pulley flanges come in H-D style mount pattern with 56 center. Front wheel for single disc is 5/16-18 UNC threaded. Total hub width 16cm. Note: Wheels come with approval for the years and models as stated, use in other model years or custom applications will void approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report. Fits: > 04-05 FXDWG
Cena 17 863,01 Kč
MCS radial 48 fat spoke rear wheel 3.50 x 16 black
Rychlý náhled

MCS radial 48 fat spoke...

MCS radial 48 fat spoke rear wheel 3.50 x 16 black Ready to run black powder coated wheel that is built with 48 8mm diameter steel spokes, a steel rim and an aluminum hub. Only spoke nipples are chrome. Wheel is pre-sealed and suitable for tubeless tires. 1' ID roller bearings are pre-installed and the brake rotor/pulley flanges come in H-D style mount pattern with 56mm center. Rear wheel is 3/8-16 UNC threaded on the brake rotor side and 7/16-14 UNC threaded on the sprocket side. Total hub width 16cm. Note: Wheels come with approval for the years and models as stated, use in other model years or custom applications will void approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report. Fits: > 06-0...
Cena 14 603,01 Kč
PM, 3.5 x 18 wheel, Paramount. CC Black
Rychlý náhled

PM, 3.5 x 18 wheel,...

PM, 3.5 x 18 wheel, Paramount. CC Black - Front - Gloss black with a Contrast Cut finish - CNC machined from hammer forged aluminum to provide maximum structural strength - Complete with pre-installed bearings and spacers for a bolt-in installation - Suitable for tubeless tires - A striking Roland Sands design that is matched only by the detail of its finish - Manufactured by Performance Machine - Will complement all bikes from stock to custom. Note: Wheels to 5.50' wide are compatible with brake rotors that have regular 3.25' radius counter bored bolt circle mount holes and 56.3mm ID. 5.50' and wider wheels will not take stock brake rotors due to the larger (2.50' OD) wheel bearings that are used in these wheels. Special 2.50' ID PM brake rotors are available and must be ordered separ...
Cena 54 519,01 Kč
MCS radial 48 fat spoke front wheel 3.50 x 16 SF black
Rychlý náhled

MCS radial 48 fat spoke...

MCS radial 48 fat spoke front wheel 3.50 x 16 SF black SF (Single Flange). Ready to run black powder coated wheel that is built with 48 8mm diameter steel spokes, a steel rim and an aluminum hub. Only spoke nipples are chrome. Ready to run black powder coated wheel that is built with 48 8mm diameter steel spokes, a steel rim and an aluminum hub. Only spoke nipples are chrome. Wheel is pre-sealed and suitable for tubeless tires. 1' ID roller bearings are pre-installed and the brake rotor/pulley flanges come in H-D style mount pattern with a 56mm center. Front wheel for single disc is 5/16-18 UNC threaded. Total hub width is 16cm. Note: Wheels come with approval for the years and models as stated, use in other model years or custom applications will void approval. Check your local MCS de...
Cena 14 603,01 Kč
PM, 3.5 x 26 wheel, Paramount. Chrome
Rychlý náhled

PM, 3.5 x 26 wheel,...

PM, 3.5 x 26 wheel, Paramount. Chrome - Front - Chrome plated finish - CNC machined from hammer forged aluminum to provide maximum structural strength - Complete with pre-installed bearings and spacers for a bolt-in installation - Suitable for tubeless tires - A striking Roland Sands design that is matched only by the detail of its finish - Manufactured by Performance Machine - Will complement all bikes from stock to custom. Note: Wheels to 5.50' wide are compatible with brake rotors that have regular 3.25' radius counter bored bolt circle mount holes and 56.3mm ID. 5.50' and wider wheels will not take stock brake rotors due to the larger (2.50' OD) wheel bearings that are used in these wheels. Special 2.50' ID PM brake rotors are available and must be ordered separately. Note: Many wh...
Cena 76 296,01 Kč
MCS radial 48 fat spoke front wheel 3.50 x 23 DF black
Rychlý náhled

MCS radial 48 fat spoke...

MCS radial 48 fat spoke front wheel 3.50 x 23 DF black DF (Dual Flange) for dual brake rotor. Ready to run black powder coated wheel that is built with 48 8mm diameter steel spokes, a steel rim and an aluminum hub. Only spoke nipples are chrome. Wheel is pre-sealed and suitable for tubeless tires. 1' ID roller bearings are pre-installed and the brake rotor/pulley flanges come in H-D style mount pattern with 56mm center. Front wheel for dual disc is 5/16-18 UNC threaded. Total hub width 16cm. Fits: > Custom applications
Cena 17 863,01 Kč
MCS radial 48 fat spoke front wheel 3.50 x 21 SF black
Rychlý náhled

MCS radial 48 fat spoke...

MCS radial 48 fat spoke front wheel 3.50 x 21 SF black SF (Single Flange). Ready to run black powder coated wheel that is built with 48 8mm diameter steel spokes, a steel rim and an aluminum hub. Only spoke nipples are chrome. Wheel is pre-sealed and suitable for tubeless tires. 1' ID roller bearings are pre-installed and the brake rotor/pulley flanges come in H-D style mount pattern with 56mm center. Front wheel for single disc is 5/16-18 UNC threaded. Total hub width 16cm. Note: Wheels come with approval for the years and models as stated, use in other model years or custom applications will void approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report. Fits: > 04-05 FXDWG
Cena 16 859,01 Kč
3.00 x 16 dual flange wheel 40 spokes chrome
Rychlý náhled

3.00 x 16 dual flange wheel...

3.00 x 16 dual flange wheel 40 spokes chrome Chrome plated 40-spoke replacement spoke wheel, laced and trued. Seals are installed, bearing spacing is pre-set and wheel is ready for installation. Wider than stock wheels are for wide tire applications. An OEM fitment may not be applicable due to OEM width restrictions in fender, belt, etc. Note: For all wire wheels it is advised to check spoke tension before installing the tire. After approx. 250km the spoke tension must be checked again to insure a correct spoke tension. After each 5000km, or as part of regular maintenance, a spoke-check is advised to insure spoke tension is still correct. Fits: > Front: 73-84 FL. Rear: 73-84 FL; 73-81 FX (NU)
Cena 13 168,01 Kč
MCS radial 48 fat spoke front wheel 2.15 x 21 SF black
Rychlý náhled

MCS radial 48 fat spoke...

MCS radial 48 fat spoke front wheel 2.15 x 21 SF black SF (Single Flange). Ready to run black powder coated wheel that is built with 48 8mm diameter steel spokes, a steel rim and an aluminum hub. Only spoke nipples are chrome. Wheel is pre-sealed and suitable for tubeless tires. 1' ID roller bearings are pre-installed and the brake rotor/pulley flanges come in H-D style mount pattern with56mm center. Front wheel for single disc is 5/16-18 UNC threaded. Total hub width 16cm. Note: Wheels come with approval for the years and models as stated, use in other model years or custom applications will void approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report. Fits: > 04-05 FXDWG
Cena 16 483,01 Kč
PM, 3.5 x 18 wheel, Paramount. CC Black
Rychlý náhled

PM, 3.5 x 18 wheel,...

PM, 3.5 x 18 wheel, Paramount. CC Black - Front - Gloss black with a Contrast Cut finish - CNC machined from hammer forged aluminum to provide maximum structural strength - Complete with pre-installed bearings and spacers for a bolt-in installation - Suitable for tubeless tires - A striking Roland Sands design that is matched only by the detail of its finish - Manufactured by Performance Machine - Will complement all bikes from stock to custom. Note: Wheels to 5.50' wide are compatible with brake rotors that have regular 3.25' radius counter bored bolt circle mount holes and 56.3mm ID. 5.50' and wider wheels will not take stock brake rotors due to the larger (2.50' OD) wheel bearings that are used in these wheels. Special 2.50' ID PM brake rotors are available and must be ordered separ...
Cena 56 330,01 Kč
PM, 3.5 x 26 wheel, Paramount. Chrome
Rychlý náhled

PM, 3.5 x 26 wheel,...

PM, 3.5 x 26 wheel, Paramount. Chrome - Front - Chrome plated finish - CNC machined from hammer forged aluminum to provide maximum structural strength - Complete with pre-installed bearings and spacers for a bolt-in installation - Suitable for tubeless tires - A striking Roland Sands design that is matched only by the detail of its finish - Manufactured by Performance Machine - Will complement all bikes from stock to custom. Note: Wheels to 5.50' wide are compatible with brake rotors that have regular 3.25' radius counter bored bolt circle mount holes and 56.3mm ID. 5.50' and wider wheels will not take stock brake rotors due to the larger (2.50' OD) wheel bearings that are used in these wheels. Special 2.50' ID PM brake rotors are available and must be ordered separately. Note: Many wh...
Cena 77 992,01 Kč
3.00 x 16 front wheel 40 spokes chrome
Rychlý náhled

3.00 x 16 front wheel 40...

3.00 x 16 front wheel 40 spokes chrome Chrome plated 40-spoke replacement spoke wheel, laced and trued. Seals are installed, bearing spacing is pre-set and wheel is ready for installation. Wider than stock wheels are for wide tire applications. An OEM fitment may not be applicable due to OEM width restrictions in fender, belt, etc. Note: For all wire wheels it is advised to check spoke tension before installing the tire. After approx. 250km the spoke tension must be checked again to insure a correct spoke tension. After each 5000km, or as part of regular maintenance, a spoke-check is advised to insure spoke tension is still correct. Fits: > 84-98 FLT/Touring; FLHT, FLHR, FLTR
Cena 13 168,01 Kč
Zpět na začátek

We use cookies to improve our services, make personal offers, and enhance your experience. If you do not accept optional cookies below, your experience may be affected. If you want to know more, please, read the Cookie Policy.